Bearing Condition Monitoring Systems

Bearing Tester S908 4 Parameter

Bearing Tester S908 Four Parameter


  • Measuring vibration velocity, displacement and acceleration.
  • Small size, transducer included, battery powered, no other component required.
  • Optional for inner or external Accelerometer.
  • One button control both power and measurement. Very easy for use.
  • 3 1/2 LCD digital display, sampling per second.
  • Holding function.
  • Automatic power off.
  • Suitable for monitoring machinery vibration caused by out-of-balance, misalignment, gear damage, bearing faults and etc.



  • Amplitude Ranges:
  • Displacement 1—1999 µm (or 200 mil) peak-peak
  • Velocity 0.1—199.9 mm/s (or 20 in/s) true RMS
  • Acceleration 0.1—199.9 m/s2 (or 20 g) Peak
  • Overall accuracy: +5%
  • Temperature range: 0 - 40 0C


Frequency response:

  • Displacement 10-500Hz
  • Velocity 10-1000Hz
  • Acceleration 10-10000Hz (Depending on external accelerometer model)
  • Battery: 9V 6F22, 25 hours of continuous operation.
  • Pickup: Accelerometer with handheld probe and /or magnetic base
  • Dimensions: 13×6×2.3 cm; Weight: 200 g

Additional Information:
  • Item Code: S908

Shock Pulse Bearing Analyzer 107b

Product Details:
  • Application: Industrial Use
  • Brand: Kohtect
  • Model: 107b

Shock Pulse Bearing Analyzer 107b

107В is a compact, handheld, microprocessor based vibration-measuring instrument designed to measure vibration parameters of the rotating machine according to ISO 10816, as well as other international standards which have been set on the same level - vibration acceleration, RMS vibration velocity, vibration displacement and Vibration spectrum analysis in FFT. It allows to measure the dynamic signals followed up by the record it into the non-volatile memory, as well overview and analyze the spectrum.

Additional Information:
  • Item Code: 107b

Bearing Condition Analyzer 77D11 with Non-Contact Tacho

Bearing Condition Analyzer 77D11 with Non-Contact Tacho

Ideally, rolling bearing elements are separated by a protective lubricant film, which impedes their collision. However, manufacturing defects, damages, which appear during operation, dirt in the bearing, insufficient or incorrect lubrication – all these factors cause the collision of the bearing elements and, as a result, acoustic oscillations of a wide spectrum are generated in the bearing body.


  • Standard Conditions for Operation
  • Operating temperature (device & sensor), -10 to 55°С, (±5)°С
  • Relative humidity 80% at temperature 30 °С
  • Atmospheric pressure, 84 to 106.7 KPa (630 - 800 mm Hg)
  • Resonance frequency, 32 kHz
  • Measurement unit, dBi, dBc, dBm
  • Range, max. 99dB
  • Resolution, 1 dB
  • Accuracy, ± 5%
  • Operating temperature (tacho), 10 to 55°С, (±5)°С
  • Tachometer range, 50-30,000rpm
  • Tachometer resolution, 1rpm
  • Tachometer sensing distance, up to 1m
  • Memory capacity, 2MB
  • PC communication port, USB


System Specification:

  • Power supply, 3.6V NiMH rechargeable battery.
  • Continuous operation on batteries, not less than 10 hours.
  • Current consumption 220V, 50 Hz AC, not more than 5VA.
  • The limits of complementary error of the instrument at voltage changing from 3.6Volts to 2.8Volts.
  • Probability of no-failure operation, not less than 0.92 per 2000 hrs.
  • The average instrument life, not less than 10 years.
  • Failure time, 1000 hours. The average failure time is set for stan-dard conditions for operation.
  • Dimensions, not more than 60 х 110 х 30 (mm).
  • Weight, not more than 210 gram.

Roller Bearing Condition Assessment Meter DPK-Vibro

Roller Bearing Condition Assessment Meter DPK-Vibro

"DPK-Vibro" is:

  • a device for vibration signal measuring (vibrometer)
  • a device for assessing roller bearing condition "on-site"
  • a vibration signal analyzer with some storage
  • a compact portable device with a bright screen



  • "DPK-Vibro" device is made for knowing the condition of your equipment.
  • The vibrometer is easy to use for the staff without any special training.
  • "DPK-Vibro" device is very small and lightweight.
  • It is cased in metal and has got a protected keyboard.
  • The built-in sensor probe is threaded M5. Instead of the probe a magnet or a M5 pin can be used.
  • The device is powered by two Ni-MH rechargeable batteries of AAA size or two batteries. The Ni-MH batteries are charged via the USB connector from the AC power or from the computer.
  • When you rotate the device, the screen also flips, adjusting to the user.

Technical Specifications

Measurement range:

A (m/s2)

V (mm/s)

S (um)





Color Display Resolution, pixels

128 * 160

Screen size, mm

29 * 36

Memory capacity, Kb


PC interface


Operation from the battery, hours


Operating temperature range, °C

-20 ÷ +40

Vibrometer dimensions, mm

97 * 60 * 19

Vibrometer weight, g.


Bearing and Unbalance Analyser 9080

Product Details:
  • Model: 9080

Bearing and Unbalance Analyser 9080

This vibration meter allows you to conduct vibration analysis at the touch of a button. The economical and easy-to-use meter displays color coded alarm levels for ISO values and bearing damage (BDU) on the full color OLED display; green (good), yellow (caution), and red (stop).
Easily identify, bearing, balance, and alignment problems

  • ISO built-in alarms
  • Easily identify bearing problems with BDU reading
  • Built in band filters detect equipment problems:
  • 1X (unbalance), 2X (misalignment), 3X (looseness)
  • View complex issues with the 800-line spectrum with zoom and cursor
  • Ruggedized IP67 design
  • Trend data with included C-trend Lite software
  • Standard cable mounded accelerometer with magnet
  • Built in Bluetooth™ communication capability
  • USB docking station to download to a PC
  • Easily collect and store data

Pen Type Bearing Damage Detector 9070

Pen Type Bearing Damage Detector 9070

9070 Smart Vibration Analyzer. Vibration analysis at the touch of a button. Analyse and Interpret readings; incredible performance at an unbelievably low price.

Overall machine and bearing conditions: vibration values are displayed with color coded alarm levels for ISO values and Bearing Damage (BDU).

  • ISO Built-in Alarms
  • Easily identify bearing problems with BDU Reading
  • 800 line FFT (spectrum)
  • Ruggedized IP67 case


The 9070 is a simple to use vibration monitoring and analysis tool that allows easy display of vibration signals. The meter automatically per-forms vibration analysis functions based on machine running speed to help diagnose faults such as unbalance, misalignment and looseness.


  • Full Color OLED Display
  • Easily identify problems with built in band filters: a) 1X (unbalance) b) 2X (misalignment) c) 3X (looseness)

Built-in accelerometer with stinger. Optional long stinger and magnetic mount available

Additional Information:
  • Item Code: 9070

Bearing Damage Detection 9071

Bearing Damage Detection 9071

9071 is a simple, easy to use, low cost vibration meter. Record, analyse and display vibration signals at the push of a button.

  • Built-in ISO Alarms
  • Find machine faults before they stop your machine
  • Increase productivity and lower maintenance costs
  • Full Color LED Display
  • Collect data
  • Standard Cable mounted accelerometer with magnet
  • ISO built-in Alarms
  • Easily identify bearing problems with BDU Reading
  • Easily identify problems with built-in band filters: a) 1X (unbalance) b) 2X (misalignment) c) 3X (looseness)
  • 800 line FFT (spectrum)
  • Ruggedized IP67 case

9071 analyzes interprets readings: ISO machine alarms and BDU reading indicate overall machine and bearing condition; clear picture of machine problems detects imbalance, misalignment and looseness; 800-line spectrum with zoom and cursor to identify complex issues.

Collect and store test data. Storage space of 10 memory blocks with 20 readings per block available. Stored readings can be displayed for analysis.

Additional Information:
  • Item Code: 9071
Looking for Bearing Condition Monitoring Systems ?
© Iadept Marketing
Desktop Site Back to top